A fake Breguet in a white gold finish appeals to shoppers who love the brand's classical guilloche dials and fluted caseband but want a wearable everyday piece rather than a safe queen. This guide explains what "white gold" actually means on a replica, which specifications are worth checking, and how to keep the finish looking sharp over time.
Key Features
- Polished white gold-tone case, most commonly in a 38-40mm diameter
- Guilloche-pattern dial with Roman numerals and printed minute track
- Blued-steel-look Breguet hands with the signature hollow pomme tips
- Automatic movement with sweep seconds and roughly a 38-42 hour power reserve
- Flat sapphire crystal with an anti-reflective coating
- Exhibition caseback showing a decorated rotor and bridges
- Leather strap with a deployant clasp for less wear on the material
- Everyday splash resistance, usually rated around 3-5 ATM
Materials and Specifications
White gold on a replica is a finishing term, not a metallurgy one. Most builds start with a 316L stainless steel case and add rhodium plating or a thin gold flash to create the cool silvery tone that reads as white gold on the wrist. Plating depth is usually measured in microns; thicker layers last longer, and the finish holds up for years of regular wear if you keep it away from abrasive cloths, perfume and chlorinated water. Inside, the better examples run a 21-jewel automatic movement built on a widely used architecture, so a local watchmaker can service or regulate it without hunting for exotic parts. Dial quality is where builds differ most, so look for applied numeral markers, an actual textured guilloche surface rather than a printed pattern, and crisp, centered printing under magnification.
Shipping and Returns
Orders normally leave the warehouse within one to three business days and ship with tracking, with most destinations seeing delivery in about one to two weeks. Inspect the watch as soon as it arrives and keep the protective film and packaging until you are sure you are keeping it. Returns are generally accepted within a short window after delivery as long as the piece is unworn and complete, so check the specific policy on the product page before ordering.
Does "white gold" mean real 18k gold?
No. On a replica it describes the colour and finish, typically rhodium plating or a gold flash over stainless steel, which gives the same bright silvery look at a far lower cost.
How do I keep the finish from dulling?
Wipe the case with a soft microfibre cloth, avoid polish compounds and ultrasonic cleaners, and take the watch off before swimming or showering. Storing it in a dry pouch also slows tarnish and hazing.
What case size should I choose?
A 38-40mm case suits most wrists and matches the proportions of the original design. If you have a wrist under about 6.5 inches, the smaller end of that range usually sits better under a cuff.